Wasp WPL304 User Manual page 18

WPL 304 User Manual
5. Place the paper, printing side face up, through the media sensor and place the
label leading edge onto the platen roller. Move the media guides to fit the label width by
turning the guide adjuster knob. Disengage the top cover support and close the top
cover gently.
6. Use "Diagnostic Tool" to set the media sensor type and calibrate the selected sensor.
(Start the "Diagnostic tool" - Select the "Printer Configuration" tab - Click the
"Calibrate Sensor" button.) Please refer to the diagnostic utility quick start guide for
more information.
Note:
* Please calibrate the gap/black mark sensor when changing media.
• Loading path for roll labels
14