Patch Reading - Kodak i5000 Series User Manual

Pausing and resuming
scanning
A-61670 August 2014
NOTE: If your scan job requires a temporary override (e.g., printing,
patch reading, multifeed detection, etc.), then the auto start
option must be disabled prior to starting your scan job to allow
access to the Overrides screen.
Alternatively, pressing Stop/Pause while scanning will also
provide access to the Overrides screen.
For more information, see the section entitled, "Scan job
overrides".
4. Touching any of the options displayed on this screen, will perform the
action (e.g., Omit Printing, Omit Patch, Omit Multifeed, Allow Maximum
Length, etc.) on the next document only. To perform these actions for the
rest of the scan job, see the section entitled, "Scan job overrides" later in
this chapter.
5. You must press the Start/Resume button to begin scanning if auto start has
been disabled by the scanning application.
You can manually stop/pause and start/resume the scanner while scanning
documents.
• To temporarily pause scanning, touch the Stop/Pause button on the
scanner once.
• If you want to stop scanning, you can touch Stop on the Operator Control
Panel touchscreen, or press the Stop/Pause button twice.
• Touch the Start/Resume on the scanner to restart scanning after it has
been paused.
NOTE: During scanning the scanner monitors its own internal image buffer
memory. In order to prevent overwriting images before the host
computer can retrieve them, the scanner will automatically pause the
feeder and will resume scanning when enough internal buffer memory
is free.
3-9