Adf Motor Unit; Feed Frame Unit - Canon imageRUNNER 1019J Service Manual

Chapter 10

10.4.4 Feed Frame Unit

10.4.4.1 Removing the Feed Frame Unit
1) Detach the front cover, the rear cover, the open/
close cover and the pickup tray.
2) Disconnect the five connectors [1].
[1]
F-10-21
3) Remove the two front screws [1], two rear screws
[2], and two grounding screws [3] to remove the
feed frame unit [4].
[3]
[4]
[1]
0013-1443
[1]
[1]
[2]

10.4.5 ADF Motor Unit

10.4.5.1 Removing the ADF Motor
1) Remove the feed frame unit.
2) Remove the two screws [1], and then remove the
drive unit [2].
[1]
F-10-23
3) Remove the two sensors [1] (by releasing the
claws), two leaf springs [2] (one screw each), two
solenoids [3] (one screw each), one E-ring [4],
three gears [5], and one belt [6].
[5] [1] [4]
[3]
[6]
F-10-24
0013-1252
[2]
[5] [1]
[2] [3]