Kodak Series 3 User Manual page 5

4
To remove the plastic strips from a print location:
1. Open the front cover of the scanner.
2. Lift the printer from the printer bracket and place it on the hanger
bracket to keep it out of the way.
CAUTION: Hot surface, avoid contact.
NOTE: Be sure the flex cable is placed between the two hooks so it
does not get damaged.
Hanger bracket
3. Remove the plastic strips from any print locations (on the transport
plate) that you will be printing in.
4. Lift the transport plate and remove the belt module.
Plastic strips
Transport plate
Belt module
A-61121 May 1999