Kodak Series 3 User Manual page 23

Kodak user's guide super12 document printer

Hide thumbs Also See for Series 3:

5. Lift out the used maintenance tray and dispose of it according to

your local and state regulations.

6. Open the package containing the new maintenance tray and

remove it.

7. Insert the new maintenance tray; be sure it is firmly in place. The

alignment blocks on the bottom of the maintenance tray should be

placed around the two angled brackets as shown:

When the maintenance tray is seated correctly, the ink spray from

the Super12 Document Printer should be deposited in the center

area of the foam in the maintenance tray.

6. Re-install the belt module.

7. Unlock and replace the transport plate.

8. Remove the printer from the hanging bracket and place it in the

proper print location.

9. Close the front cover.

Maintenance tray

A-61121 May 1999

Table of Contents

Super12