Kodak Series 3 User Manual page 28

Error codes
A-61121 May 1999
Following is a list of errors codes you may encounter when using the
Super12 Document Printer.
Error: E133 Feeder waiting for printer.
Probable cause: The feeder will not be ready until the printer has
moved to the print position.
Solution: Wait until the printer has moved into the print position.
Error: E206 Check Print Cartridge(s)
Probable cause: This error may be displayed for one of the following
reasons:
Either no print cartridge(s) is installed or one or both print
cartridge(s) may be installed but not making a good connection.
The print cartridge may be defective.
The flex cable may not be working properly.
Solution: Be sure the print cartridges are seated correctly and that they
are making a good connection.
1. Enter function code F56 to determine if more than 10 jets are out on
any one or more characters.
2. Press F40 and select Option 1, Change Heads.
3. Open the front cover of the scanner.
4. Lift the printer out of the printer bracket. One or both of the flex
cables lights will be blinking.
5. Determine which print cartridge is not making a good connection.
The blinking light(s) on the flex cable correspond with the print
cartridge that is not seated correctly.
6. Reinstall the print cartridges.
IMPORTANT: When installing the print cartridges, be sure you
hear and feel the print cartridge click into place.
7. Press the print head continuity button. If the flex cable lights stop
flashing, a good connection is made.
8. Place the printer back in the desired print location and close the
door.
27