Kodak Series 3 User Manual page 15

14
7. Slide a new print cartridge in the Super12 Document Printer slots,
then gently push the cartridge forward until you hear and feel it click
into place. Use the illustration below as a guide.
IMPORTANT: If changing both print cartridges, install the one
that is farthest away from the Orientation switch
first.
8. When inserting the second print cartridge, hold it closer to the
orientation switch when sliding it in place
CAUTION: Hot surface, avoid contact.
Orientation
switch
9. After the print cartridges are installed and locked into place, press
the print head continuity button. This checks that the print head is
placed correctly in the printer.
Print head
continuity
button
Flex cable lights
A-61121 May 1999