Kodak Series 3 User Manual page 10

F45 — Verifying print
quality
A-61121 May 1999
Perform the following procedure to verify the print quality is satisfactory:
1. Enter function code F45 (Print Test) and press Enter.
2. Press 2 (Test Pattern). The transport starts automatically.
3. Feed a blank sheet of paper; a test pattern will be printed.
4. Evaluate the appearance of the test pattern. A complete test
pattern should look similar to the following illustration:
If the pattern is complete, begin work.
If the pattern is not legible:
Check to see that the print cartridges are inserted properly.
See the section entitled, "Installing a new print cartridge " for
more information.
Perform function code F48 (Purge function) to help unclog
the print head jet openings.
Repeat the print test.
5. Press 1 and verify your current mode image looks acceptable.
NOTES:
If you select a blank print template or the No Print Template
option (depending on the specific mode you are printing in), then
the selection of 1, Current Mode Image, may print nothing.
Print Test Pattern always prints with 100% contrast.
The Mode Image prints with the specified contrast setting (F39).
9