Kodak Series 3 User Manual page 14

A-61121 May 1999
4. If the print cartridges are already installed, remove the cartridges.
5. Open the new print cartridge package and remove the print
cartridge from the package.
6. Remove the protective tape from the bottom of the print cartridge.
NOTE: Do not discard the protective tape if you plan on storing a
partially used print cartridge. You will need to place this tape
over the orifice plate on the print cartridge to keep it from
drying out.
The small window on the side of the black print cartridge indicates if
the cartridge is empty, full or how much ink is left in the cartridge. If
the window is green, the print cartridge is full; if the window is black,
it is empty.
green
black
indicates Full
indicates Empty
Red print cartridges do not have the Full/Empty indicator, therefore,
you can weigh the print cartridge to estimate how much ink remains.
A full print cartridge weighs approximately 110 grams; an empty
print cartridge weighs approximately 70 grams.
Orifice plate
Protective tape
13