Kodak Series 3 User Manual page 18

Cleaning materials and
supplies
Cleaning the document
printer
A-61121 May 1999
Use the Super12 Maintenance Kit that comes with the Super12
Document Printer.
The Maintenance Kit contains the following:
Cleaning swabs
Rubber gaskets
A maintenance tray
The following supplies are available through your Kodak sales contact.
Supply
Super12 Maintenance Kit
Black print cartridge (6/package)
Red print cartridge (6/package)
To clean the Super12 Document Printer, follow the steps below.
1. Enter function code F40 and press Enter. The following message
will be displayed:
Print Head Position
1=Change Head(s) 2=Clean Printer
2. Select 1; a Please Wait message will be displayed. When this
message is no longer displayed, open the front cover of the
scanner.
3. Note the current location of the Super12 Document Printer, then lift
it out of the printer bracket and place it on the feeder top cover.
CAUTION: Hot surface, avoid contact.
4. Remove the print cartridges. If there is any ink build-up on the print
cartridges, clean it with a swab.
5. Place the printer back in the desired print location.
6. Close the front cover.
CAT No.
165 8483
822 1376
145 6532
17