Oce CS4236 User Manual page 68

Interface of Océ Scanner Agent
#
Scanner mode
"<N/A>"
"Scanner is unsup-
ported"
"Scanner is busy or
turned off"
"Programming
Mode. Firmware
may be download-
ed"
"Initializing"
"Warming Up"
"Ready"
"Not Ready. Error
detected"
"Test Mode"
"Continuous self-
test mode"
"Calibrating"
"Adjusting"
"Standby"
Error messages
This field relays errors returned from the scanner and related to the current Scanner mode.
When there is no error detected in the Scanner mode field, <None> is displayed in the
Error messages.
Error messages are useful for troubleshooting your scanner's function or connection. Here
is a list of error messages:
68 Chapter 8 - Océ Scanner Agent
Description
Scanner not accessible. Océ Scanner Agent has not (yet) detected
the scanner.
The connected scanner is not a model compatible with Océ
Scanner Agent.
This message is displayed while downloading firmware to the
scanner.
The scanner is in this mode when firmware is being downloaded
with the firmware.exe program.
The scanner is initializing its settings (start-up).
The scanner needs to warm up before it can function in optimal
conditions. This takes a few minutes.
The scanner is ready for scanning.
An error was detected. View the error message.
The scanner test mode is used during technical service.
The scanner is performing test operations to ensure optimal
performance: light profile corrections, stitching, etc.
The scanner is performing calibration of the cameras.
The scanner is adjusting its cameras.
The scanner is in standby mode when the LED indicator is red.
The Timer powers the scanner on and off from the standby
mode.