Contents Contents Chapter 1 Preface.........................5 Notes for the reader...................6 Naming conventions for finishers (commercial naming and naming in User Interfaces)..................8 Chapter 2 Use the scanner....................9 The main parts of the scanner..............10 Scanning information................13 Copy or scan originals using the glass plate.........15 Copy or scan originals using the ADF............18...
Notes for the reader Notes for the reader Introduction This manual helps you to use the Duplex Color Image Reader Unit-D1. The manual contains a description of the product and guidelines to use and operate the Duplex Color Image Reader Unit-D1.
Page 7
Notes for the reader Word Icon Indicates Warning Laser beam Caution Ignoring this warning could cause injury or damage to property. Note Indicates additional important information. The use of heat-resistant gloves is mandatory when you carry out these actions. Important safety instructions Warning: Close the feeder cover gently to avoid catching your hands, as this may result in personal injury.
The main parts of the scanner The main parts of the scanner Introduction Place your originals on the glass plate or into the automatic document feeder (ADF), depending on the size and type of the original, and the copy modes that you want to use. Both sides of 2-sided originals can be scanned simultaneously.
Page 11
The main parts of the scanner Note: If the glass plate is dirty, the print quality may deteriorate. In this case, clean the feeding belt and the glass plate. Note: Blocking the original output area can result in damaging originals, and printing may not take place correctly.
Page 12
The main parts of the scanner Component Function Originals output tray The originals output tray receives the scanned originals, in the order these were fed in the ADF. Paper guides Adjust the paper guides to match the width of the original. Document feed scanning area Scans documents sent from the ADF.
Scanning information Scanning information Introduction You can place an original either vertically or horizontally. Always align the top edge of your original with the back edge of the glass plate (by the arrow in the top left corner) or the back edge of the ADF. The size of the original is automatically detected, and the document is scanned.
Page 14
Scanning information Orientation in the ADF Placement in the ADF Placement Illustration Vertical placement Horizontal placement Placement of the originals You can place originals of the following sizes either vertically or horizontally. However, the scanning speed for horizontally placed originals is somewhat slower than that of ver- tically placed originals.
Copy or scan originals using the glass plate Copy or scan originals using the glass plate Introduction Use the glass plate to copy or scan bound originals (such as books and magazines), heavy or lightweight originals, and transparencies. Also place originals on the glass plate when you want to copy an A3 original with an image that extends all the way to the edges without the periphery of the original being cut off.
Page 16
Copy or scan originals using the glass plate Step Action Illustration Align the top edge of your original with the back edge of the glass plate (by the arrow in the upper-left cor- ner). Note: When you enlarge an A4 or A5 original onto A3 paper, place the original horizontal- ly on the glass plate, and...
Page 17
Copy or scan originals using the glass plate Step Action Illustration Gently close the ADF to prevent personal injury or damage to the scanner. Chapter 2 - Use the scanner...
Copy or scan originals using the ADF Copy or scan originals using the ADF Introduction Use the ADF to copy or scan a set of up to 300 originals. The scanner automatically feeds the originals to the glass plate and scans them. 2-sided originals can also be scanned as 2- sided documents.
Page 19
Copy or scan originals using the ADF Step Action Illustration Define the copy or scan settings on the operator panel, and touch 'Start' When scanning is complete, remove the originals from the original output area to avoid paper jams. Chapter 2 - Use the scanner...
Page 20
Copy or scan originals using the ADF Chapter 2 - Use the scanner...
Clean the scanner sensors Clean the scanner sensors When to do When copies contain stains. Required tool • Soft tissue How to clean the scanner sensors Clean the scanner sensors Step Action Illustration 'Open the main cover.' 'Use a tissue to clean the scanner sensor.' Chapter 3 - Maintenance...
Page 23
Clean the scanner sensors Step Action Illustration 'Open the white plate.' 'Open the lower right-hand guide.' Chapter 3 - Maintenance...
Page 24
Clean the scanner sensors Step Action Illustration 'Use a tissue to clean the scanner sensor.' 'Close the lower right-hand guide.' Chapter 3 - Maintenance...
Page 25
Clean the scanner sensors Step Action Illustration 'Close the white plate.' 'Close main cover' Chapter 3 - Maintenance...
Page 26
Clean the scanner sensors Chapter 3 - Maintenance...
Clear a paper jam Clear a paper jam Introduction If a paper jam occurs in the ADF, the operator panel display a message that indicates the paper jam. Follow the instructions on the operator panel and the procedure described below to solve the paper jam. Warning: When you remove jammed originals or paper, take care not to cut your hands on the edges of the originals or paper.
Page 29
Clear a paper jam Step Action Illustration Open the inner cover, holding it by its front tab. Turn the green feed dial and remove any jammed originals. Close the inner cover. Close the ADF cover. Chapter 4 - Troubleshooting...
Page 30
Clear a paper jam Step Action Illustration Open the ADF and remove any jammed originals. Close the ADF. Chapter 4 - Troubleshooting...
Duplex Color Image Reader Unit-D1 Note: Whenever a number of sheets is mentioned in the table below, the figure is based on media of 80 g/m² (20 lb Bond). Specifications of Duplex Color Image Reader Unit-D1 Item Specifications Description One-pass duplex document feeder, and B&W and...
Page 33
Specifications Item Specifications Positioning of sheets Face up Automatic format detection Automatically detected formats A3R, A4, A4R, A5, A5R, B4R, B5, B5R, B6R, Statement 5.5" x 8.5", StatementR, Letter 8.5" x 11", LetterR, LegalR 8.5" x 14", TabloidR 11" x 17"...
Page 34
Index Index Scan originals Using the ADF ..........18 Using the glass plate ........15 Copy jobs ............18 Scanner Scan jobs ............18 Clean lower sensor ..........22 Clean upper sensor .........22 Clear a paper jam Clear a paper jam ..........28 Conversion table for commercial names and user interface names Conversion table for commercial names and user interface names...