Chapter 5 - Oce CS4236 User Manual

A delay factor can be set in the scanning application. The delay will give you time to
5.
control straight positioning of the document if you feel the scanner is grabbing the original
too fast.
Manual loading
Make sure the Paper handling option "Manual" is set in your scanning application.
1.
Align the center of the document with the center arrow marking on the scanner bed.
2.
Push the original into the insertion slot until you feel it contact the rollers and the Paper
3.
Ready LED lights green.
While holding the original in place with one hand, use the other hand to press and hold
4.
down the Paper Forward button on the scanner. When Paper Ready LED green – press
the Paper Forward button
The original moves into the start-scan position.
5.
Unloading the original after scan
Press the Paper Backward button to eject the original back to the scanner feeding bed
1.
(towards you).
Loading Originals into the scanner
Chapter 5 - Loading an original 29