Important Safety Instructions - Oce CS4236 User Manual

Important safety instructions

Important safety instructions
Important safety instructions
Note:
Read all of these instructions and save them for later use. Follow all warnings and instruc-
tions marked on the scanner.
A. Do not place the scanner on an unstable surface, stand, cart or table. Serious damage
can be caused if the unit falls.
B. When cleaning, do not spray/apply liquid cleaners directly onto the scanner parts.
Apply liquids to your cloth and then use the dampened cloth to clean.
C. Before cleaning or replacing any user-replaceable parts, be sure to turn the scanner
power off and disconnect the power plug.
D. The scanner should be operated from the power source type indicated on the marking
label. If you are unsure of the type of power available, consult your dealer or local power
company.
E. The scanner is equipped with a three-wire grounding type plug. This plug will fit only
into a grounding-type power outlet. This is a safety feature. If you are unable to insert
the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not
defeat or ignore the purpose of the grounding-type plug.
F. Do not allow anything to rest on the power cord. Do not locate the scanner where
persons will walk on the cord.
G. If an extension cord is used with the scanner, make sure that the total ampere ratings
of the products plugged into the extension cord does not exceed the extension card ampere
rating. Make sure that the total rating of *+all products plugged into the wall outlet does
not exceed 15 amperes.
H. Slots or openings in the cabinet at the back or bottom are provided for ventilation.
This ensures reliable operation of the product and protects it from overheating. These
openings must never be blocked or covered. The openings should never be blocked by
placing the unit on a bed, sofa, rug, or other similar soft surface. This product should
never be placed near or over a radiator or heat register. This product should not be placed
in a built-in installation unless proper ventilation is provided.
I. Never push objects of any kind into the scanner through cabinet slots since they may
touch dangerous voltage points or short out parts that could result in a risk of fire or
electrical shock. Avoid any possibility of spilling liquid of any kind on the scanner.
J. Do not attempt to service the scanner yourself. Opening or removing those covers re-
quiring tools may expose you to dangerous voltage points or other risks. Refer all servicing
in those compartments to authorized service personnel.
K. Unplug the scanner from the wall outlet and refer servicing to authorized service per-
sonnel under the following conditions:
92 Chapter 11 - Appendix