Oce CS4236 User Manual page 19

Action
14 Switch on your PC and start
Windows.
Windows will detect the new
hardware (scanner) during start-
up and the drivers you installed
in step 2. will be recognized.
Follow Windows' hardware in-
stallation instructions should any
appear on your screen.
15 Verify correct scanner installa-
tion:
1. Locate the scanner icon on the
Windows System Tray. This is
the Océ Scanner Agent program
icon.
2. Left-double-click on the Océ
Scanner Agent system program
icon.
3. Your scanner is installed and
detected if your scanner's name
appears at the top of the Océ
Scanner Agent system Status tab
dialog.
4. If the scanner was not in-
stalled correctly, a message will
inform you that your scanner
could not be detected.
If this is the case turn off power
to all connected devices and re-
peat the installation steps.
16 Lauch Océ Copy Easy.
Remarks
Chapter 3 - Installation
Installation
19