Replacing The Glass - Oce CS4236 User Manual

Replacing the glass plate
Step Action
12 Insert a new glass plate (fit into
bottom position groove).
1. The glass plate will rest in the
scanner's lid between the bottom
and top position grooves. Locate
the glass plate's bottom position
groove in the lid. This is the
groove furthest from your body
when you stand at the scanner's
front.
2. Place the lower edge of the
glass plate so it rests in the glass
plate's bottom position groove.
3. Carefully tilt the upper edge
(the edge closest to your body)
down until the glass plate rests
in the scanner lid between the 2
grooves (top/bottom position
grooves).
13 Lock the new glass plate in place.
The glass needs to be locked in
place with the four latches. At
this point, the latches are under
the glass plate and they need to
be brought above so they grip
the glass plate's edge.
1. Start at the right side.
2. Press down on the first (right-
most) latch release button.
3. With your other hand, press
down on the glass plate near the
latch so the glass plate's edge
snaps down under the latch.
4. Repeat the process with the
remaining three latches.
5. Ensure that all four latches are
gripping the glass plate's edges.
58 Chapter 7 - Maintenance
Remarks