Configuring Dns - ZyXEL Communications ZyAIR User Manual

ZyAIR Wireless Gateway Series User's Guide
LABEL
Set Community
Trusted Host
Trap
Community
Destination
SNMP
Server Port
Server Access
Secured Client
IP Address
Apply
Reset

13.7 Configuring DNS

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa, for
example, the IP address of www.zyxel.com is 204.217.0.2. Refer to the Internet Access chapter for more
information.
To change your ZyAIR's DNS settings, click ADVANCED, REMOTE MANAGEMENT and then the
DNS tab. The screen appears as shown.
13-10
Enter the Set community, which is the password for incoming Set requests from the
management station.
If you enter a trusted host, your ZyAIR will only respond to SNMP messages from this
address. A blank (default) field means your ZyAIR will respond to all SNMP messages
it receives, regardless of source.
Type the trap community, which is the password sent with each trap to the SNMP
manager.
Type the IP address of the station to send your SNMP traps to.
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the ZyAIR using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the ZyAIR
using this service.
Select All to allow any computer to access the ZyAIR using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyAIR using this service.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
Table 13-6 SNMP
DESCRIPTION
Remote Management