Displaying And Debugging A Cluster - 3Com 4200G 12-Port Configuration Manual

Displaying and
Debugging a Cluster
Configuration procedure
Configure enhanced cluster functions
Table 335
Operation Command
Enter system view
system-view
Enter cluster view
cluster
Configure an FTP Server
ftp-server ip-address
for the cluster
Confirm the current
topology accept { all [
topology of the cluster
save-to
and save it as a
mac-address mac-address |
reference topology file
member-id member-id }
Save the reference
topology save-to local-flash
topology file to the local
Flash
Restore the local
topology restore-from
topology file to the
local-flash
reference topology file
Remove a specified
delete-member member-id [
cluster member device
to-black-list ]
from the cluster
Add the device with the
black-list add-mac
specified MAC address
mac-address
to the black list
Remove the device with
black-list delete-mac {
the specified MAC
mac-address | all }
address from the black
list
After the above-mentioned configuration, you can use the display command or the
tracemac command in any view to view the cluster operating information, so as to
verify configuration result.
Use the reset command in user view to clear the NDP statistics.
Display and debug a cluster
Table 336
Operation
Display cluster members
Display the MAC addresses, names, and the
corresponding ports of the devices whose MAC
addresses are within that of the current device and
the device with specified MAC address
Display the MAC addresses, names, and the
corresponding ports of the devices whose IP
addresses are within that of the current device and
the device with specified IP address
Display the standard topology view of the cluster
Display the current blacklist of the cluster
Display the current topology view or the topology
path between two points

Displaying and Debugging a Cluster 389

local-flash ] |
Command
display cluster members [ member-num |
verbose ]
tracemac by-mac mac-address vlan vlan-id
[nondp]
tracemac by-ip ip-address [nondp]
display cluster base-topology [
mac-address mac-address | member-id
member-number ]
display cluster black-list
display cluster current-topology [
mac-address mac-address [ to-mac-address
mac-address ] | member-id member-number
[ to-member-id member-number ] ]
Description
-
-
Required
Optional
Optional
Optional
Optional
Optional
Optional