3Com 4200G 12-Port Configuration Manual page 294

280 C 33: SNMP C
HAPTER ONFIGURATION
Table 249 Configure SNMP basic functions for SNMP V1 and SNMP V2C (Continued)
Operation
Set a Direct
community configura
name and tion
access
authority
Indirect
configura
tion
Set the maximum size of SNMP
packets that the Agent can
send/receive
Set the device engine ID
Create or update the view
information
Table 250 Configure SNMP basic functions (SNMP V3)
Operation
Enter system view
Enable SNMP Agent
Set system information
Set an SNMP group
Add a new user for an SNMP group
Command
Set a snmp-agent community
community { read | write }
name community-name [ acl
acl-number | mib-view
view-name ]
Set an snmp-agent group { v1 |
SNMP v2c } group-name [
group read-view read-view ] [
write-view write-view ] [
notify-view notify-view ] [
acl acl-number ]
Add a new snmp-agent usm-user { v1 |
user for an v2c } user-name group-name
SNMP [ acl acl-number ]
group
snmp-agent packet
max-size max-size
snmp-agent local-engineid
engineid
snmp-agent mib-view
{ included | excluded }
view-name oid-tree
Command
system-view
snmp-agent
snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { { v1 | v2c | v3 }* |
all } }
snmp-agent group v3
group-name [
authentication | privacy ] [
read-view read-view ] [
write-view write-view ] [
notify-view notify-view ] [
acl acl-number ]
snmp-agent usm-user v3
user-name group-name [
authentication-mode
{ md5 | sha } auth-password
[ privacy-mode des56
priv-password ] ] [ acl
acl-number ]
Description
Required
Direct configuration for
■
SNMP V1 and SNMP
V2C is based on
community name.
Indirect configuration.
■
The added user is equal
to the community
name for SNMPV1 and
SNMPV2C.
You can choose either
■
of them as needed.
Optional
By default, it is 1,500
bytes.
Optional
By default, the device
engine ID is "Enterprise
Number + device
information".
Optional
By default, the view name
is ViewDefault and OID is
1.
Description
—
Required
By default, SNMP Agent is
disabled.
Optional
By default, the contact
information for system
maintenance is "R&D
Beijing, 3Com.", the
system location is "Beijing
China", and the SNMP
version is SNMP V3.
Required
Required