3Com 4200G 12-Port Configuration Manual page 36

22 C 3: L
HAPTER OGGING IN THROUGH THE
C P
ONSOLE ORT
Table 18 Console port login configuration with authentication mode being scheme
Operation
Configure Set the
the Console baud rate
port
Set the
check mode
Set the stop
bits
Set the data
bits
Configure the command
level available to users
logging into the user
interface
Make terminal services
available to the user
interface
Set the maximum number
of lines the screen can
contain
Set history command
buffer size
Set the timeout time for
the user interface
Command
speed speed-value
parity { even | mark |
none | odd | space }
stopbits { 1 | 1.5 | 2 }
databits { 7 | 8 }
user privilege level level
shell
screen-length
screen-length
history-command
max-size value
idle-timeout minutes [
seconds ]
Description
Optional
The default baud rate of the AUX port
(also the Console port) is 9,600 bps.
Optional
By default, the check mode of a
Console port is set to none, that is, no
check bit.
Optional
The default stop bits of a Console port
is 1.
Optional
The default data bits of a Console port
is 8.
Optional
By default, commands of level 3 are
available to users logging into the AUX
user interface.
Optional
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can contain up to
24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Optional
The default history command buffer
size is 10. That is, a history command
buffer can store up to 10 commands by
default.
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a user
interface is terminated if no operation is
performed in the user interface within
10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.