3Com 4200G 12-Port Configuration Manual page 397

Finish to synchronize the command.
# Configure the group name to be ggg.
[chwn_0.S4200G-cluster] cluster-snmp-agent group v3 ggg
Member 2 succeeded in the group configuration.
Member 1 succeeded in the group configuration.
Finish to synchronize the command.
# Configure the MIB view name to be mmm, with org sub-tree contained in
the MIB view.
[chwn_0.S4200G-cluster] cluster-snmp-agent mib-view included mmm org
Member 1 succeeded in the mib-view configuration.
Member 2 succeeded in the mib-view configuration.
Finish to synchronize the command.
# Configure an SNMP v3 user, with the user name being uuu. The user
belongs to the group named ggg.
[chwn_0.io-cluster] cluster-snmp-agent usm-user v3 uuu ggg
Member 2 succeeded in the usm-user configuration.
Member 1 succeeded in the usm-user configuration.
Finish to synchronize the command.
# Display the current configuration on the master switch.
[chwn_0.S4200G-cluster]display current-configuration
#
sysname S4200G
#
radius scheme system
#
domain system
#
acl number 3998
rule 0 deny ip destination 168.192.0.0 0.0.0.255
rule 1 permit ip source 168.192.0.0 0.0.0.255
acl number 3999
rule 0 deny ip source 168.192.0.0 0.0.0.255
rule 1 permit ip destination 168.192.0.0 0.0.0.255
#
vlan 1
#
cluster
ip-pool 168.192.0.1 255.255.255.0
build chwn
cluster-snmp-agent community read aaa
cluster-snmp-agent group v3 ggg
cluster-snmp-agent mib-view included mmm org
cluster-snmp-agent usm-user v3 uuu ggg
#
snmp-agent
snmp-agent local-engineid 800007DB000FE22405626877
snmp-agent community read aaa@cm0
snmp-agent sys-info version all
snmp-agent group v3 ggg
snmp-agent mib-view included mmm org
snmp-agent usm-user v3 uuu ggg
undo snmp-agent trap enable standard
#
# Display the current configuration on member switch numbered 2.
<chwn_2.S4200G> system-view
System View: return to User View with Ctrl+Z.
[chwn_2.S4200G]cluster
[chwn_2.S4200G-cluster]display current-configuration
#
sysname S4200G
Introduction to the Newly Added Cluster Functions 383