3Com 4200G 12-Port Configuration Manual page 363

Enabling Information
Output to the SNMP
Table 305 Enable information output to the trap buffer
Operation Command
Enable information info-center trapbuffer
output to the trap [ channel { channel-number |
buffer channel-name } ] [ size
buffersize]
Define an information info-center source { modu-name
source | default } channel
{ channel-number |
channel-name } [ { log | trap |
debug } * { level severity | state
state } * ]
Set the format of time info-center timestamp { log |
stamp trap | debugging } { boot | date
| none }
To view debug information of specific modules, you need to set the information type
as debug in the info-center source command, and enable debugging on
corresponding modules with the debugging command as well.
Table 306 lists the related configurations on the switch.
Table 306 Enable information output to the SNMP
Operation Command
Enter system view system-view
Enable the information info-center enable
center
Enable information info-center snmp channel
output to the SNMP { channel-number |
channel-name }
Define an information info-center source { modu-name
source | default } channel
{ channel-number |
channel-name } [ { log | trap |
debug } * { level severity | state
state } * ]
Set the format of time info-center timestamp { log |
stamp trap | debugging } { boot | date
| none }
To view debug information of specific modules, you need to set the information type
as debug in the info-center source command, and enable debugging on
corresponding modules with the debugging command as well.
To send information to remote SNMP workstation properly, related configurations are
required on both the switch and the SNMP workstation.
Information Center Configuration 349
Description
Optional
By default, the switch outputs
information to the trap buffer,
which can holds up to 256 items by
default.
Required
Optional
This is to set the time stamp format
for log/debug/trap information
output.
This determines how the time
stamp is presented to users.
Description
—
Optional
By default, the information center is
enabled.
Required
By default, SNMP information goes
through channel 5.
Required
Optional
This is to set the time stamp format
for log/debug/trap information
output.
This determines how the time
stamp is presented to users.