About This Guide; How To Use This Guide - 3Com SuperStack II 3300 User Manual

How to Use This
Guide
A T
BOUT HIS
This guide describes the SuperStack
SuperStack II Switch 1100 and 3300 family. Before reading this guide,
make sure that you are familiar with routing concepts and Virtual LANs
(VLANs). Make sure you are also familiar with the command line and Web
interfaces for the SuperStack II Switch 1100 and 3300 products.
If release notes are shipped with your product and the information there
differs from the information in this guide, follow the instructions in the
release notes.
This user guide and its release notes are available in Adobe Acrobat
Reader Portable Document Format (PDF) on the 3Com World Wide Web
site:
http://www.3com.com/
Table 1 shows where to look for specific information in this guide.
Table 1 Where to find specific information
If you are looking for...
An overview of the module, and an outline of its main features
Information on where to place the module in your network
Installation information for the module
Information on managing the module
Information about using the Web interface
Information on configuring system and SNMP parameters
Information on configuring VLANs
Information on configuring IP parameters on the module, including
RIP and OSPF
Problem solving information
(continued)
G
UIDE
®
II Switch Layer 3 Module for the
Turn to...
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9