Handsfree Answerback - Mitel 5212 User Reference Manual

Final
3
Press the FWDOFF softkey.
To use this feature, you must have a key programmed with Forward to
Prompt.
The system stores internal extensions, therefore you do not need to press
the ENTER softkey.
If you forward a phone to an external phone number, you must have
permission to make that external call and Redirect Inbound Call to
External Number permission. See "Permissions" on page
instructions on how to view your call permissions.
If you have this feature turned on when you log out of your phone all your
calls will be forwarded to the defined prompt.

Handsfree answerback

Using Handsfree answerback, you can have intercom calls automatically
answered so that you have a two-way speech connection. See "Intercom
Calls" on page 44.
Press the Handsfree answerback key to turn the feature on. Press the key a
second time to turn the feature off. The LED on the programmed key indicates
when the Handsfree answerback feature is turned on.
To be able to activate and deactivate this feature with a key, you must have a
key programmed with Handsfree answerback.
You can also enable the feature without a key by checking the box for
Handsfree answerback on your Personal Details page. See "Change user
details" on page 95.
Hold
Using Hold, you can put an active call on hold, and make other calls. The Line
Appearance key will flash to indicate the call is on hold.
To place a call on hold, follow these steps:
1
While on an active call, press Hold on a 5020/5220 IP phone or the
key on a 5224 IP phone.
The indicator light next to the active Line Appearance changes from
green to red and flashes slowly.
2
To remove the call from hold, press the Line Appearance key.
99 for
Using the phone system 43