B Common System Temperature Sensor - Viessmann VITOCAL 300-G Installation And Service Instructions Manual

Parameter group system definition
7015 External blocking mixer "CLOSED"
Value Heating circuit with
mixer M2
"3" Mixer "Close"
"4" Control mode
"5" Mixer "Close"
"6" Control mode
"7" Mixer "Close"
Delivered condition
Setting range
7017 Vitocom 100
"Vitocom 100 7017"
Using the Vitocom 100 communication
interface.
Valu Explanation
e
"0" Vitocom 100 is not used.
"1" Vitocom 100 is installed and ena-
bled.

701B Common system temperature sensor

"Common system sensor 701B"
In systems with a heating water buffer
cylinder, a common flow temperature
sensor ("System flow temperature sen-
sor") can be installed in the heating water
flow, downstream of the heating water
buffer cylinder.
184
Heating circuit with
mixer M3
Mixer "Close"
Control mode
Control mode
Mixer "Close"
Mixer "Close"
4
0 to 8
(cont.)
Heat pump blocking
No
Yes
Yes
Yes
Yes
Delivered condition
Setting
Valu Explanation
e
"0" System flow temperature sensor
is not used. The flow temperature
sensor for the secondary circuit is
not used.
"1" System flow temperature sensor
is installed and enabled.
Delivered condition
Setting
0
0 / 1
1
0 / 1