Type T0S-Ze: Solar Thermal System; Maximum Collector Area And Sizing Information; Connecting The Solar Collectors; Type T0S-Ze: External Heat Generator - Viessmann Vitocal 060-A Installation And Service Instructions For Contractors

Installation sequence

Type T0S-ze: Solar thermal system

Maximum collector area and sizing information

DHW heat pump technical guide

Connecting the solar collectors

Solar collector installation instructions
For connections to the DHW heat pump, see pages 9
and 22.
Note
■ The cylinder temperature sensor is fitted at the fac-
tory.
■ A high limit safety cut-out (accessories) for stopping
the solar circuit pump must be fitted.
High limit safety cut-out (accessories) installa-
tion instructions

Type T0S-ze: External heat generator

For connections to the DHW heat pump, see pages 9
and 22.

Fitting the temperature sensor

!
Please note
Damage to the connecting cables and sensor
leads (capillaries) causes malfunctions.
The connecting cables and sensor leads must
■
not come into contact with hot components.
When routing and securing connecting cables
and sensor leads, ensure that the maximum
permissible temperatures for these cables/
leads are not exceeded.
Do not kink the capillary tubes.
■
20
Note
In outdoor air mode, the immersion heater (accesso-
ries) is essential.