Image Quality; Adjust Fax Size - Fuji Xerox DocuPrint C2090 FS User Manual

To determine the output paper type, do the following:
1. Press <FAX> button then <Size/Type> button on the control panel. Use the <◄/►> buttons to
browse for function list.
2. Choose [Paper type] and press <Set> to configure the settings.
3. Choose the output paper type for the document.
4. Press <Set> to confirm your choice.
5. Press the <▲> button to return to [READY] mode.
Note:
• This fax function support Plain and Bond paper
To determine the output paper size, do the following:
1. Press <FAX> button then <Size/Type> button on the control panel. Use the <◄/►> buttons to
browse for function list.
2. Choose [Paper size] and press <Set> to configure the settings.
3. Choose the output paper size for the document.
4. Press <Set> to confirm your choice.
5. Press the <▲> button to return to [READY] mode.
Note:
• When Auto Fit On, output paper size can support for A4, B5, 8.5x"11" and 8.5" x 14"
• When Auto Fit Off, output paper size can support for A4, B5 and 8.5x"11"
7.4.2

Image quality

To configure the settings for fax image quality, do the following:
1. Press <FAX> button then <Image Quality> button on the control panel. Use the <◄/►> buttons to
browse for function list.
2. Choose [Image quality] and press <Set>.
3. Press the <◄/►> buttons to choose to configure the settings for brightness.
4. Choose [Brightness] and press <Set> to confirm.
5. Press the <◄> button to increase the brightness of the scan copy. And press the <►> button to
decrease it.
6. Press <Set> to confirm your choice.
7. Press the <▲> button to return to [READY] mode.
7.4.3

Adjust fax size

You can adjust the fax size to fit the document size automatically by turning on the [FAX Auto fit Support]
function.
To enable the FAX Auto fit Support function, do the following:
1. Press <FAX> button then <Reduce/Enlarge> button.
- 71 -