Table of Contents
Advertisement
10.9 Menu tree
This section briefly introduces the DocuPrint C2090 FS operation menu tree and settings using the control
panel. For details on how to operate the control panel, refer to "Control panel" on page 10. For
COPY/FAX/SCAN mode menu tree instructions, refer to the menu tree section on the User Guide (on the
software bundle CD-ROM).
10.9.1 LCD screen definition
LCD indication
Wait..
Copy Ready
Text
A5 / A4
NN
Original Size
A4
Paper Type
Plain
Scan Ready
300
To FTP1 XXX.XXX
Scanning...
300
To FTP1 XXX.XXX
FAX Ready
Text
Set Distribution
This message appears on the LCD screen when:
1. System is booting, or
2. Lump warm up, or
3. Wake up from power saver mode.
When the above mentioned action has been completed, the MFP will return to
Ready mode.
This LCD screen displays the system status:
1. The MFP is ready to copy.
2. Type of original document: Text
3. A5: Indicates the paper size of original document.
4. A4: Indicates the paper size of document output.
5. NN: Enter the number of copies you want to make. (1~99)
This LCD screen displays the original size setting menu.
This LCD screen displays the media selection menu.
This LCD screen displays the system status:
1. The MFP is ready to scan.
2. 300: Indicates the scan resolution.
3. FTP1: Scans to FTP Server 1.
This LCD screen displays the system status:
1. The MFP is scanning.
2. 300: Indicates the scan resolution.
3. XXX.XXX: Indicates the LAN IP address.
This LCD screen displays the system status:
1. The MFP is in Fax mode.
2. Setting FAX-Tx mode.
Description
- 118 -
Advertisement
Table of Contents
