Sending A Fax From One-Touch / Speed-Dial Direct Fax; Sending A Fax From Tx Reservation Fax - Fuji Xerox DocuPrint C2090 FS User Manual

To sending a fax from Network Fax
1. Make sure the Ethernet cable connected and driver is installed in system.
2. From the [File] menu of the application software, select [Print].
3. Select the FAX Network Printer as the printer to be used the press [OK].
4. Before the fax printer driver fax out the document, the following window appears on the screen. Enter
the recipient information and click [Add to list] to add it to the recipient list.
5. Select receiver from address list or Input receiver information include title, company name and fax
number then press [OK]
6. Click the [OK] button to send the fax
7.2.2

Sending a fax from One-touch / Speed-dial Direct FAX

Use one-touch / speed-dial direct fax to assign a speed dial name to a single number or a group of
numbers. You can send a fax to that number or numbers by selecting the speed dial name.
To sending a fax from speed dial direct fax
1. Press the <Fax> button on the control panel.
2. In Fax mode, the LCD will show [Set FAX Num Std].
3. Press <Speed Dial> button and select a number from the numeric keypad.
4. LCD will show [FAX Ready std - Speed XX AAAAA].
XX: the selected speed number (1-10)
AAAAA: Registered destination name. If name longer than display area, the name is displayed
by scrolling.
5 Press <Start> to confirm your setting.
To sending a fax from one touch fax
1. Press the <Fax> button on the control panel.
2. In Fax mode, the LCD will show [Set FAX Num Std].
3. Press <One Touch > button and select a number from the numeric keypad.
4. LCD will show [FAX Ready std - OneTouchX: AAAAA].
X: the selected speed number (1-8)
AAAAA: Registered destination name. If name longer than display area, the name is displayed
by scrolling.
5. Press <Start> to confirm your setting. .
7.2.3

Sending a fax from Tx reservation FAX

To sending a fax from Tx reservation FAX
1. Press the <Fax> button on the control panel.
2. Press <►> and select [Tx Revervation].
3. Press <Set> button and LCD show [Time XX:XX] select a number (0~9) from the numeric keypad
then press <Set> to confirm your setting.
4. Then LCD shows [Reservation std - ____________], select a number (0~9) from the numeric
keypad and press <Start>
- 68 -