Previewing And Adjusting The Scan Area From Twain Driver; Scan Adjustment From Twain Driver - Fuji Xerox DocuPrint C2090 FS User Manual

Note:
• When scan Legal 13" and Legal 14", please switch to Advance Mode with Auto Document Feeder scan
source, Simple Mode does not support this function.
5.3.4

Previewing and adjusting the scan area from TWAIN driver

Once you have configured the basic settings for scanning, you can preview the image and select or adjust
the area of the image you want to scan. The preview image will be displayed in the preview window on
TWAIN window. If the preview image is satisfactory, you can then scan the document properly.
To preview and adjust the scan image, do the following:
1.
Change [Scan size] as size of your document.
2.
Click the [Preview] icon in the TWAIN window.
3.
To select a scan area, click the [Select] icon to place a marquee in the preview window that marks
the edges of your image area. You can change the scan area by moving the marquees.
4.
When you finished adjusting the scan area, click <Scan> to start scanning.
5.3.5

Scan adjustment from TWAIN driver

You can scan your images by default settings or set relative scan configurations to acquire your scans.
To set the target image size, do the following:
1.
Switch to [Advance Mode] and Select [Scan Source] to involve scan from where your original
replaced.
2.
Select [Color Mode] to determine your scan image color mode.
- 56 -