Table of Contents
Advertisement
When no print data is received for 5 minutes, the printer will enter the power saver mode.
When the printer enter power saver mode, only the <Power Saver> indicator lights, the screen on the control
panel becomes dark and all the other indicator goes out. The display also goes out, and nothing is displayed.
3.5 Exiting the power save mode
The printer is automatically cancels the power save mode once it receives data from the computer.
To cancel power saver mode manually, press the <Power Saver> button.
3.6 Installing the toner cartridges
Warning
Never throw a toner cartridge into an open flame. It can cause an explosion and burn injuries.
1. After confirming the [Load XXXX (the color of the toner) Cartridge] message on the control panel,
open the front cover.
2. Hold the tape and gently pull it forward to remove the protective cover from the toner cartridge.
3. Take the toner cartridge out of the box, and gently shake it several times as shown in the diagram to
distribute the toner evenly.
- 25 -
Advertisement
Table of Contents
