Replacing brake pads, front brake
•
Remove brake caliper.
•
Remove keeper (arrow) from retaining pin.
•
Drive out retaining pin.
•
Remove brake pads.
•
Installation is the reverse of the removal proce-
dure.
•
Before installing the brake caliper, force the pis-
tons fully back with resetting tool,
BMW No. 34 1 500.
X
Tightening torque:
Brake caliper to fork slider tube.................... 40 Nm
00.30
Replacing brake pads, rear brake
R21000241
•
Remove brake caliper.
•
Remove keeper (arrow) from retaining pin.
•
Drive the retaining pin out towards the wheel
side.
•
Remove brake pads.
•
Installation is the reverse of the removal proce-
dure.
•
Before installing the brake caliper, force the pis-
tons fully back.
X
Tightening torque:
Brake caliper to rear wheel drive .................. 40 Nm
R21000250
R21000260