Removing And Installing Bowden-Cable Divider, Bowden Cable For Throttle Actuation And Starting-Speed Increase - BMW R 1150 GS Repair Manual

1
Removing and installing Bowden-
cable divider,
Bowden cable for throttle actuation
and starting-speed increase
•
Disengage fuel tank and pull to the rear.
•
Remove actuating cable for starting-speed in-
crease.
•
Disengage Bowden cable (A).
•
Remove Bowden-cable cover from fitting for
throttle actuation.
•
Disengage Bowden cable (B).
•
Disengage throttle cables from right and left
throttle flap stubs.
•
Remove cable ties securing Bowden cables.
•
Disconnect engine breather line from engine.
•
Pull Bowden-cable divider (1) out of holder in di-
rection indicated by arrow.
•
Installation is the reverse of the removal procedure.
•
If necessary, remove the intake air pipe.
•
Adjust Bowden cables.
B
A
B
A
.................................................... see Group 00
a
R21320040
32.11