BMW R 1150 GS Repair Manual page 107

•
Install the end cover with O-ring in perfect condi-
tion.
X
Tightening torque:
M 6 screw ...................................................... 9 Nm
•
Adjust the holder for minimum end float.
Rocker end float:
min............................................ 0.05 mm (0.002 in)
max. .......................................... 0.40 mm (0.016 in)
11.60
RS110050
•
Install cylinder head cover.
e
Caution:
Make sure that gaskets are correctly seated. Gas-
kets and sealing faces must be free from oil and
grease.
X
Tightening torque:
Cover screw................................................... 9 Nm
RS110100
•
Secure air intake stub pipe.
X
Tightening torque:
M 6 screw ...................................................... 9 Nm
RS110940
RS110440