Removing And Installing Rear Swinging Arm; Removing Rear Swinging Arm - BMW R 1150 GS Repair Manual

A
Removing and installing rear
swinging arm

Removing rear swinging arm

•
Remove rear wheel drive unit.
•
Remove rear spring strut.
•
Swinging-arm bearing studs are secured with
Loctite: heat to max. 120 °C (248 °F) to release.
•
Loosen floating bearing stud bolt.
•
Loosen fixed bearing stud bolt.
•
Remove floating bearing/fixed bearing stud
bolts.
•
Remove swinging arm with gaiter.
A
R21330020
33.19