Lexmark W840 Finisher Service Manual page 26

4024-XXX
283.00
Paper jam
Check areas G, G4
283.01
Paper jam
Check area G2
283.02
Paper jam
Check areas G2, G3
283.03
Paper jam
Check area G2
283.04
Paper jam
Check area G4
284.00
Paper jam
Check area F
284.01
Paper jam
Check area F
284.02
Paper jam
Check areas G2, G3
284.03
Paper jam
Check area G2
2-4
Finisher Service Manual
Sensor (buffer path) on
jam A
Sensor (buffer path) on
jam B
Sensor (buffer path)
Static jam A
Sensor (buffer path)
Static jam B
Sensor (buffer path)
Static jam C
Sensor (lower media
exit) off jam A
Sensor (lower media
exit) on jam A
Sensor (lower media
exit) on jam B
Sensor (lower media
exit) on jam C
Sensor (buffer path) is not turned on within the
specified time after the sensor (finisher media entrance
is turned on.
Go to "283.00 Sensor (buffer path) on jam A" on
page 2-22.
Sensor (buffer path) is not turned on within the
specified time after the sensor (finisher media entrance
is turned on.
At this time, the sensor (diverter gate) is turned on.
Go to "283.01 Sensor (buffer path) on jam B" on
page 2-24.
Paper remains on the sensor (finisher buffer path).
At this time, both sensor (diverter gate) and sensor
(transport exit) are turned on.
Go to "283.02 Sensor (buffer path) static jam A" on
page 2-26.
Paper remains on the sensor (finisher buffer path).
At this time, the sensor (diverter gate) is on state, but
the sensor (finisher media entrance) is turned off.
Go to "283.03 Sensor (buffer path) static jam B" on
page 2-27.
Paper remains on the sensor (finisher buffer path).
At this time, the sensor (diverter gate) is turned off.
Go to "283.04 Sensor (buffer path) static jam C" on
page 2-28.
Sensor (lower media exit) is not turned off within the
specified time after the finisher sensor (lower media
exit) is on.
At this time, the sensor (bridge unit media exit) is
turned on.
Go to "284.00 Sensor (lower media exit) off jam A."
on page 2-28.
Sensor (buffer path) is not turned on within the
specified time after the sensor (finisher media
entrance) is turned on.
At this time the sensor (bridge unit media exit) is turned
on.
Go to "284.01 Sensor (lower media exit) on jam A"
on page 2-30.
Sensor (buffer path) is not turned on within the
specified time after the sensor (bridge unit media
entrance) is turned on.
At this time, the sensor (finisher media entrance) is
turned on.
Go to "284.02 Sensor (lower media exit) on jam B"
on page 2-32.
Finisher sensor (lower media exit) not turned on within
the specified time after the sensor (buffer path) is
turned on.
Go to "284.03 Sensor (lower media exit) on jam C"
on page 2-34.