Carriage Lift Belt Right Removal - Lexmark W840 Finisher Service Manual

4024-XXX

Carriage lift belt right removal

1.
Remove the rear upper cover. See
2.
Remove the finisher front door assembly. See
3.
Move the slip clutch gear 24T (A) toward the rear to disengage the stacker bin (B).
4.
Move the stacker bin (B) to its lowest position.
Note: Make sure the stacker bin is at the lowest position before continuing.
4-32
Finisher Service Manual
"Rear upper cover removal" on page
"Finisher front door assembly removal" on page
B
4-24.
A
Rear
4-27.