Punch Unit Assembly Removal - Lexmark W840 Finisher Service Manual

Punch unit assembly removal

1.
Open the finisher front door assembly.
2.
Remove the rear upper cover. See
3.
Remove the punch carriage assembly. See
4.
Remove the screw securing the cover (A) to the punch unit assembly (B).
5.
Remove the cover (A).
6.
Remove the two screws securing the bracket (C) to the punch carriage assembly (D).
7.
Remove the bracket (C).
8.
Remove the three screws securing the punch carriage assembly (D) to the punch unit assembly (B).
9.
Remove the punch unit assembly (B)
"Rear upper cover removal" on page
"Punch carriage assembly removal" on page
D
B
C
4024-XXX
4-24.
4-41.
A
4-45
Repair information