Maintenance; Admin - D-Link DIR-505 User Manual

Section 3 - Router Mode
This page will allow you to change the password for the administrator account for configuring the settings of the DIR-505. You
can also turn on graphical authentication(CAPTCHA) on this page. After making your changes, click the Save.Settings button.
Password: Enter a new password for the Administrator Login Name. The
administrator can make changes to the settings.
Verify Enter the same password that you entered in the previous
Password:
textbox in order to confirm its accuracy.
Enable
Check to enable Graphical Authentication, or CAPTCHAs
Graphical when logging in to the web UI of the DIR-505. This provides
Authentication:
an extra layer of security by requiring you to enter a code
that is displayed on-screen.
Enable HTTPS Check to enable HTTPS when connecting to the router for
Server: configuration. When enabled, you will need to enter https://.
to connect to the DIR-505. For example: https://dlinkrouter
Enable Remote Remote management allows the DIR-505 to be configured over
Management:
the Internet through a web browser. A username/password is
still required to access the configuration interface.
Remote Admin This is the port that will be used to access the DIR-505
Port:
configuration interface when using remote management. You
will need to add this port number after the IP address.
Example: http://x.x.x.x:8080 where x.x.x.x is the IP address of
the DIR-505 and 8080 is the remote admin port.
D-Link DIR-505 User Manual

Maintenance

Admin

61