Sign in today to find solutions:

Don't have an account? Sign up

 

Summary of Contents

  • Page 2

    Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description March 29, 2012 • Initial release for Revision A1...

  • Page 3: Table Of Contents

    Router/Access Point Mode ..........13 Network Settings ..............53 Repeater Mode ..............15 Router Settings ...............53 Wi-Fi Hot Spot Mode ............17 DHCP Reservation ............54 Quick Router Setup for Mobile Device ......19 Media Server.................55 SharePort Mobile App ............22 Storage ...................56 Settings ..................23 D-Link DIR-505 User Manual...

  • Page 4: Table Of Contents

    Quick Setup Wizard ..............101 Internet Sessions ..............78 Quick Setup Wizard ............103 Wireless .................79 Manual Configuration ............105 Help ..................80 Wireless Settings .............. 105 Access.Point.Mode............81 Repeater Mode ............106 Quick Setup Wizard ..............81 LAN Setup ................107 D-Link DIR-505 User Manual...

  • Page 5: Table Of Contents

    Configure WPA/WPA2 Personal .......... 128 WPA/WPA2 ................. 154 Internet Settings .............. 129 WPS/WCN 2.0 ..............156 Wireless LAN Setup ............130 Windows® XP ................157 Manual Wireless Settings ..........131 WPA/WPA2 ................. 158 LAN Setup ................132 D-Link DIR-505 User Manual...

  • Page 6: Table Of Contents

    Table of Contents Troubleshooting.............160 Wireless.Basics..............164 What is Wireless? ..............165 Tips ....................167 Networking.Basics............168 Statically Assign an IP address ..........169 Technical.Specifications..........170 Contacting.Technical.Support........171 GPL.Code.Statement............172 Warranty................187 Registration..............194 D-Link DIR-505 User Manual...

  • Page 7: Product.overview, Package Contents

    Section 1 - Product Overview Product Overview Package Contents DIR-505 All-in-One Mobile Companion Ethernet Cable Quick Install Guide If any of the above items are missing, please contact your reseller. D-Link DIR-505 User Manual...

  • Page 8: System Requirements

    • Internet Explorer 8 or higher Utility.Requirements • Firefox 8.0 or higher • Safari 4.0 or higher • Google Chrome (16.0.9.12.75) Windows .Users: Make sure you have the latest version of Java ® installed. Visit www.java.com to download the latest version. D-Link DIR-505 User Manual...

  • Page 9: Introduction

    The most complete set of security features including Active Firewall and WPA/WPA2 to protect your network against outside intruders. TOTAL.COVERAGE The DIR-505 delivers powerful 802.11n performance and increases the range of your wireless network by extending the range of your wireless coverage of another AP or wireless router.

  • Page 10: Features

    This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. •.Compatible.with.802.11g.Devices - The DIR-505 is still fully compatible with the IEEE 802.11g standards, so it can connect with existing 802.11g, USB, and Cardbus adapters.

  • Page 11

    Web File Access. Both allows you to share a USB or a storage device with your local network. Reset Button Pressing the Reset button restores the router to its original factory default settings. Ethernet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem. D-Link DIR-505 User Manual...

  • Page 12: Leds

    The device is powered ON and operating properly Blinking Green The device is processing WPS Green Power/Status Light off The device is off Solid Red During Power ON or system is defective Light off The device is powered off D-Link DIR-505 User Manual...

  • Page 13: Installation, Operation Modes

    Please configure the DIR-505 with a computer connected directly to the AP. The next few pages will explain the different operational modes you can use. Operation Modes Depending on how you want to use your DIR-505 will determine which mode you use. This section will help you figure out which setting works with your setup. • Router/Access Point mode •...

  • Page 14: Router

    Router In the Router mode, the DIR-505 acts as a central connection point for any computer (client) that has a 802.11n or backward- compatible 802.11g wireless network interface and is within range of the AP. Clients must use the same SSID (wireless network name) and channel as the AP in order to connect.

  • Page 15: Access Point Mode

    Access Point Mode In the Access Point mode, the DIR-505 acts as a central connection point for any computer (client) that has a 802.11n or backward-compatible 802.11g wireless network interface and is within range of the AP. Clients must use the same SSID (wireless network name) and channel as the AP in order to connect.

  • Page 16: Repeater Mode

    Repeater Mode In Repeater Mode, the DIR-505 increases the range of your wireless network by extending the wireless coverage of another AP or wireless router. The APs and wireless router (if used) must be within range of each other. Make sure that all clients, APs, and the wireless router all use the same SSID (wireless network name), channel, and security settings.

  • Page 17: Hot Spot Mode

    Internet Tablet). If you are going to connect an Ethernet-enabled devices to your DIR-505, move the switch to “Wi-Fi HotSpot Mode”. Then, plug the DIR-505 into a wall outlet and verify that the power LED is lit. Wi-Fi Hot Spot Mode has NAT which allows an IP network to maintain a public IP address separately from your private IP address.

  • Page 18: Wireless Installation Considerations

    1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

  • Page 19: Manual Setup, Router/access Point Mode

    Manual Setup Router/Access Point Mode Router/AP 1. Find an outlet close to an Internet- enabled device. Then, move the switch to “Router/AP Mode” and plug the DIR-505 into a wall outlet. Verify that the power LED has turned green. Ethernet Outlet 2.

  • Page 20

    Once the setup is complete then proceed to the next step. 5. From your laptop or mobile device go to your wireless utility to display the available wireless networks and select the network that you created for internet access. D-Link DIR-505 User Manual...

  • Page 21

    Section 2 - Installation Repeater Mode 1. Move the switch to “Repeater Mode”. Then, plug the DIR-505 Repeater into a wall outlet and verify that the power LED has turned green. 2. From your laptop or mobile device go to your Wireless Utility to...

  • Page 22

    4. Select the configuration method and click Next. For Manual configuration, select the Wi-Fi network you would like the DIR-505 to connect to wirelessly. 5. Enter the Wi-Fi Password and click Next. Once the second screen appears, you have successfully completed the setup.

  • Page 23: Wi-fi Hot Spot Mode

    Section 2 - Installation Wi-Fi Hot Spot Mode 1. Move the switch to “Wi-Fi Hot Spot”. Then, plug the DIR-505 Wi-Fi Hot into a wall outlet and verify that the power LED has turned Spot green. 90mm 2. From your laptop or mobile device go to your Wireless Utility to...

  • Page 24

    SSID & password in your companion card for future reference. 6. From your laptop or mobile device go to your wireless utility to display the available wireless networks and select the network that you created in step 5 D-Link DIR-505 User Manual...

  • Page 25: Quick Router Setup For Mobile Device

    2. From your mobile device, click Settings. Then, click Wi-Fi. Settings 3. Select the network that is displayed on your companion card (ex: dlinka8f). Then, enter the Wi-Fi password included in your card (ex:akbdj1936). D-Link DIR-505 User Manual...

  • Page 26

    Section 2 - Installation 4. Once it connected, click on the QRS Mobile icon. 5. Click Start to continue. 6. Follow the instruction and click Next to continue. D-Link DIR-505 User Manual...

  • Page 27

    Section 2 - Installation 7. Once the Setup is complete, the following screen will show up. Then, select your new Wi-FI Name and enter the password you just setup from your laptop or mobile device. D-Link DIR-505 User Manual...

  • Page 28: Shareport Mobile App

    Router/AP Repeater Wi-Fi Hot Spot 2. Insert your USB flash drive to DIR-505 first and then Plug DIR-505 into wall outlet. Note: Please refer to page 56 for Storage setup information before you proceed to the next step below. 3. Scan the bar code to download the SharePort Mobile APP from the app store to your iPhone or iPad.

  • Page 29: Settings

    4. From your iOS mobile device, click Settings. Settings 90mm 5. Click Wi-Fi and select the network (SSID) that you assigned during initial D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note Web browser link: Web browser link: setup. Then, enter your Wi-Fi password.

  • Page 30

    Then, click Edit to enter your User Name and Password. Once you finish, click Done to continue. By default, user Name is “admin” and password is blank. 9. For the Movie section, click the movie icon to play your movie from your USB flash drive. D-Link DIR-505 User Manual...

  • Page 31

    11. For the Photo section, click the Photo icon to open your photo from your USB flash drive. 12. For the Files section, click on the Files icon to open your file from your USB flash drive. D-Link DIR-505 User Manual...

  • Page 32

    Section 2 - Installation 14. For the Folder section, click on the folder icon to open a file from your USB flash drive. D-Link DIR-505 User Manual...

  • Page 33: Router.mode, Quick Setup Wizard

    If you have already configured your settings and you would like to access the configuration utility, please refer to page 30. This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue.

  • Page 34

    In order to secure your router, please enter a new password. Check the Enable Graphical Authentication box to enable CAPTCHA authentication for added security. Click Next to continue. Select your time zone from the drop-down menu and click Next to continue. D-Link DIR-505 User Manual...

  • Page 35

    If you clicked Yes, a window may appear (depending on what web browser you are using) to create a bookmark. The router will now reboot. Please allow a minute or two. Click the Continue button once it is active. D-Link DIR-505 User Manual...

  • Page 36: Web-based Configuration Utility

    Internet Explorer and enter the IP address of the router (http://192.168.0.1). Windows and Mac users may also connect by typing http://dlinkrouter or http://dlinkrouter.local.in the address bar. Select Admin from the drop-down menu and then enter your password. Leave the password blank by default. D-Link DIR-505 User Manual...

  • Page 37: Internet Connection Setup

    If you want to configure your router to connect to the Internet using the wizard, click Internet.Connection.Setup.Wizard. You will be directed to the Quick Setup Wizard. Please skip to page 23. D-Link DIR-505 User Manual...

  • Page 38

    Section 3 - Configuration This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. In order to secure your router, please enter a new password. Click Next to continue.

  • Page 39

    Section 3 - Configuration Select your Internet connection type and click Next to continue. Verify that you are connected to the D-Link Router with the PC that was originally connected to your broadband connection, and if you are, then click the Clone MAC button to copy your computer’s MAC Address.

  • Page 40

    The software is no longer needed and will not work through a router. If the router detected or you selected PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue. D-Link DIR-505 User Manual...

  • Page 41

    If the router detected or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. D-Link DIR-505 User Manual...

  • Page 42: Manual Internet Setup, Dynamic (cable)

    MAC address unless required by your ISP. You can use the Copy.Your.PC’s. MAC. Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-505 User Manual...

  • Page 43: Internet Setup, Pppoe

    Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy.Your.PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-505 User Manual...

  • Page 44: Pptp

    Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time. Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service or its features.

  • Page 45

    The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone.Your.PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-505 User Manual...

  • Page 46: L2tp

    Enter your L2TP password and then retype the password in the next box. Reconnect Select either Always-on, On-Demand, or Manual. Mode: Maximum Idle Enter a maximum idle time during which the Internet connection Time: is maintained during inactivity. To disable this feature, enable Auto-reconnect. D-Link DIR-505 User Manual...

  • Page 47

    The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended Address: that you change the default MAC address unless required by your ISP. You can use the Clone.Your.PC’s.MAC.Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DIR-505 User Manual...

  • Page 48: Wireless Settings

    If you want to configure the wireless settings on your router using the wizard, click Wireless.Security.Setup.Wizard and refer to the next page. If you want to manually configure the wireless settings on your router click Manual Wireless.Network.Setup.and refer to page 45. D-Link DIR-505 User Manual...

  • Page 49: Wireless Security Setup Wizard

    Manually: Select this option to manually enter your network key and click Next. If you selected Automatically, the summary window will display your settings. Write down the security key and enter this on your wireless clients. Click Save to save your settings. D-Link DIR-505 User Manual...

  • Page 50

    Section 4 - Security Select Manually to manually enter your network key and click Next. Enter your Wireless Security Password and click Next to continue. If you selected Manually, the following screen will appear once the setup is complete. D-Link DIR-505 User Manual...

  • Page 51: Manual Configuration, Wireless Settings, Router Mode

    Mixed.802.11n,.802.11g.and.802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients. Wireless Indicates the channel setting for the DIR-505. The Channel can be changed to fit the channel setting for an existing wireless Channel: network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.

  • Page 52

    Visibility Status: Check the box if you do not want the SSID of your wireless network to be broadcasted by the DIR-505. If checked, the SSID of the DIR-505 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-505 in order to connect to it.

  • Page 53

    Mixed.802.11n,.802.11g.and.802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients. Wireless Indicates the channel setting for the DIR-505. The Channel can be changed to fit the channel setting for an existing wireless Channel: network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.

  • Page 54

    Visibility Status: Check the box if you do not want the SSID of your wireless network to be broadcasted by the DIR-505. If checked, the SSID of the DIR-505 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-505 in order to connect to it.

  • Page 55: Wireless Security

    Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-505 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) •...

  • Page 56: Configure Wep

    6. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router. D-Link DIR-505 User Manual...

  • Page 57: Configure Wpa/wpa2 Personal

    6. Click Save.Settings at the top of the window to save your settings. If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the access point. D-Link DIR-505 User Manual...

  • Page 58: Configure Wpa Enterprise

    6. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port. 7. Next to Shared Secret, enter the security key. 8. Click Save.Settings to save your settings. D-Link DIR-505 User Manual...

  • Page 59: Network Settings, Router Settings

    Local Domain: Enter the Domain name (Optional). Enable DNS Uncheck the box to transfer the DNS server information from Relay: your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DIR-505 User Manual...

  • Page 60: Dhcp Reservation

    (name of your computer or device), MAC Address, and IP address. Enable: Check to enable the reservation. Edit: Click the edit icon to make changes to the reservation entry. Delete: Click to remove the reservation from the list. D-Link DIR-505 User Manual...

  • Page 61: Media Server

    This feature allows you to share music, pictures and videos with any devices connected to your network. Enable Media Check this box to enable the media server feature. Server: Computer Enter the media server’s name. Name: D-Link DIR-505 User Manual...

  • Page 62: Storage

    Verify Password: Re-enter the password. Click Add/Edit to create the user. User List: Displays the accounts. The Admin and Guest accounts are built-in to the router. Number of Displays the USB device plugged into the router. Devices: D-Link DIR-505 User Manual...

  • Page 63: Advanced, Virtual Server

    The public port is the port seen from the Internet side, and the private port is the port being used by the application on the computer within your local network. Protocol Type: Select TCP, UDP, or Both.from the drop-down menu. D-Link DIR-505 User Manual...

  • Page 64: Application Rules

    “Trigger Port” field, select the protocol type as TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic. The DIR-505 provides some predefined applications in the table on the bottom of the web page. Select the application you want to use and enable it.

  • Page 65: Mac Address Filter

    Click the SAVE.button to add the new MAC filtering Rule: rule to the MAC Filtering Rules list at the bottom of this screen. You may select a client MAC address from the drop- down menu and click <<. D-Link DIR-505 User Manual...

  • Page 66: Website Filters

    Web.Filter under the Access Control section. Select either DENY. computers. access. to. ONLY. Add Website Filtering Rule: these.sites or ALLOW.computers.access.to.ONLY. these.sites. Website URL/ Enter the keywords or URLs that you want to allow Domain: or block. Click Save.Settings. D-Link DIR-505 User Manual...

  • Page 67: Firewall Settings

    Firewall Settings A firewall protects your network from the outside world. The DIR-505 offers a firewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications.

  • Page 68: Advanced Wireless

    HT20/40 You may choose to Enable or Disable this feature. Enabling Coexistence: this feature allows two “channels” or paths on which data can travel to be combined to increase performance in some environments. D-Link DIR-505 User Manual...

  • Page 69: Wi-fi Protected Setup (wps)

    Restore the default PIN of the router. Default: Generate New Create a random number that is a valid PIN. This becomes PIN: the router’s PIN. You can then copy this PIN to the user interface of the wireless client. D-Link DIR-505 User Manual...

  • Page 70

    You can also simply press the WPS button on the side of the router, and then press the WPS button on your wireless client to automatically connect without logging into the router. Refer to page 106 for more information. D-Link DIR-505 User Manual...

  • Page 71: Upnp Settings

    Section 3 - Configuration UPnP Settings Enable UPnP: To use the Universal Plug and Play (UPnP ) feature click on ™ Enabled. UPnP provides compatibility with networking equipment, software and peripherals. D-Link DIR-505 User Manual...

  • Page 72: Guest Zone

    Enable Routing Check to allow network connectivity between the Between Zones: different zones created. Security Mode: Select the type of security or encryption you would like to enable for the guest zone. D-Link DIR-505 User Manual...

  • Page 73

    If you choose to expose a computer, you can enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the chosen computer completely to the outside world. Check the box to enable DMZ. Enable DMZ: DMZ IP Address: Enter the DMZ IP Address. D-Link DIR-505 User Manual...

  • Page 74: Maintenance, Admin

    Web Management interface. Remote Admin The port number used to access the DIR-505 is used in the URL. Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of Port: the DIR-505 and 8080 is the port used for the Web Management interface.

  • Page 75: Time

    To manually input the time, enter the values in these Time Manually: fields for the Year, Month, Day, Hour, Minute, and Second and then click Set.Time. You can also click Copy.Your.Computer’s.Time.Settings to synch the date and time with the computer you are currently on. D-Link DIR-505 User Manual...

  • Page 76: System

    Click to reboot the router. Clear Language If you previously installed a language pack and want to Pack: revert all the menus on the Router interface back to the default language settings, click the Clear button. D-Link DIR-505 User Manual...

  • Page 77: Firmware

    If you want to install a new language pack, make sure that you have the language pack available. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site.

  • Page 78: Dynamic Dns

    Username or Enter the Username or key for your DDNS account. Key: Password or Enter the Password or key for your DDNS account. Key: Timeout: Enter a timeout time (in hours). Status: Displays the current connection status. D-Link DIR-505 User Manual...

  • Page 79: System Check

    The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP address that you wish to Ping and click Ping. Ping Results: The results of your ping attempts will be displayed here. D-Link DIR-505 User Manual...

  • Page 80: Schedules

    You must click Save. Settings at the top for your schedules to go into effect. Schedule Rules The list of schedules will be listed here. Click the Edit List: icon to make changes or click the Delete icon to remove the schedule. D-Link DIR-505 User Manual...

  • Page 81: Status, Device Info

    Device Info This page displays the current information for the DIR-505. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.

  • Page 82: Logs

    Click this button to view the last page of the Router logs. Previous: Click this button to view the previous page of the Router logs. Next: Click this button to view the next page of the Router logs. Clear: Clears all of the log contents. D-Link DIR-505 User Manual...

  • Page 83: Statistics

    Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-505 on both the WAN, LAN ports and both the 802.11n/g (2.4GHz) and 802.11n/a (5GHz) wireless bands. The traffic counter will reset if the device is rebooted.

  • Page 84: Internet Sessions

    The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. D-Link DIR-505 User Manual...

  • Page 85: Wireless

    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. D-Link DIR-505 User Manual...

  • Page 86: Help

    Section 3 - Configuration Help D-Link DIR-505 User Manual...

  • Page 87: Access.point.mode, Quick Setup Wizard

    Section 3 - Configuration Access Point Mode Quick Setup Wizard Click Next to begin the Quick Setup Wizard. Select Access Point from the drop-down menu and click Next to continue. D-Link DIR-505 User Manual...

  • Page 88

    32 characters. Then enter a Wi-Fi Password and click Next. When this screen appears, the setup is complete. Writ down your Wi-Fi Security Settings information for future reference. Click the Save button to save your settings. D-Link DIR-505 User Manual...

  • Page 89: Wireless Setup

    Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-657. If Invisible is selected, the SSID of the DIR-657 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-657 D-Link DIR-505 User Manual...

  • Page 90: Lan Setup

    Enter the Primary and Secondary DNS server IP addresses DNS Server: assigned by your ISP. These addresses are usually obtained automatically from your ISP. Enter the value 0.0.0.0 if you did not specifically receive these from your ISP. D-Link DIR-505 User Manual...

  • Page 91

    Click the SAVE.button to add the new MAC filtering Rule: rule to the MAC Filtering Rules list at the bottom of this screen. You may select a client MAC address from the drop-down menu and click <<. D-Link DIR-505 User Manual...

  • Page 92

    HT20/40 You may choose to Enable or Disable this feature. Coexistence: Enabling this feature allows two “channels” or paths on which data can travel to be combined to increase performance in some environments. D-Link DIR-505 User Manual...

  • Page 93

    Restore the default PIN of the router. Default: Generate New Create a random number that is a valid PIN. This becomes PIN: the router’s PIN. You can then copy this PIN to the user interface of the wireless client. D-Link DIR-505 User Manual...

  • Page 94

    PIN, or pressed a special Wi-Fi Protected Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well. Add Wireless Click to start the wizard. Device Wizard: D-Link DIR-505 User Manual...

  • Page 95: User Limit

    This sections allows you to set a limit on the number of wireless clients to control wireless traffic. Enable User Check the box to enable user limit. Limit: User Limit: Enter a number to regulate the user limit and wireless traffic. D-Link DIR-505 User Manual...

  • Page 96: Admin, Maintenance

    Enables a challenge-response test to require users to type Authentication: letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your router’s network settings. D-Link DIR-505 User Manual...

  • Page 97

    Click to reboot the router. Clear Language If you previously installed a language pack and want to Pack: revert all the menus on the Router interface back to the default language settings, click the Clear button. D-Link DIR-505 User Manual...

  • Page 98

    If you want to install a new language pack, make sure that you have the language pack available. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site.

  • Page 99

    To manually input the time, enter the values in these Time Manually: fields for the Year, Month, Day, Hour, Minute, and Second and then click Set.Time. You can also click Copy.Your.Computer’s.Time.Settings to synch the date and time with the computer you are currently on. D-Link DIR-505 User Manual...

  • Page 100

    The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP address that you wish to Ping and click Ping. Ping Results: The results of your ping attempts will be displayed here. D-Link DIR-505 User Manual...

  • Page 101

    You must click Save.Settings at the top for your schedules to go into effect. Schedule Rules The list of schedules will be listed here. Click the List: Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DIR-505 User Manual...

  • Page 102: Device Info, Status

    Device Info This page displays the current information for the DIR-505. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.

  • Page 103

    Click this button to view the last page of the Router logs. Previous: Click this button to view the previous page of the Router logs. Next: Click this button to view the next page of the Router logs. Clear: Clears all of the log contents. D-Link DIR-505 User Manual...

  • Page 104

    Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-505 on both the WAN, LAN ports and both the 802.11n/g (2.4GHz) and 802.11n/a (5GHz) wireless bands. The traffic counter will reset if the device is rebooted.

  • Page 105

    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. D-Link DIR-505 User Manual...

  • Page 106

    Section 3 - Configuration Help Click the desired hyperlink to get more information about how to use the Router. D-Link DIR-505 User Manual...

  • Page 107: Repeater.mode, Quick Setup Wizard

    Section 3 - Configuration Repeater Mode Quick Setup Wizard This Wizard is designed to assist you in configuring your DIR-505 as an repeater. To start the Setup Wizard click Next. Select WPS as the configuration method only if your wireless device supports Wi-Fi Protected Setup (WPS).

  • Page 108

    Select Manual as the configuration method to set up your network manually. Click Next to continue. Please wait while your device scans for available Wi-Fi networks. Select the network you would like your device to connect to and click Connect to continue. D-Link DIR-505 User Manual...

  • Page 109: Quick Setup Wizard

    Select WPS as the configuration method only if your wireless device supports Wi-Fi Protected Setup (WPS). Click Next to continue. Press down the Push Button on the Wireless device you are adding to your wireless network. D-Link DIR-505 User Manual...

  • Page 110

    Section 3 - Configuration Select Manual as the configuration method to set up your network manually. Click Next to continue. Select the network you would like your device to connect to and click Connect to continue. D-Link DIR-505 User Manual...

  • Page 111

    Section 3 - Configuration Manual Configuration Wireless Settings Use this section to manually configure the wireless settings for your D-Link Repeater. D-Link DIR-505 User Manual...

  • Page 112

    SSID. For security purposes, it is highly recommended to change from the default network name. Channel Width: Select the appropriate channel width between 20MHz or Auto.20/40MHz from the drop-down menu. Security Mode: Select WEP or WPA Personal. Refer to page 88. D-Link DIR-505 User Manual...

  • Page 113

    This section will allow you to change the local network settings of the access point and to configure the DHCP settings. Device Name: Enter the Device Name of the AP. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. LAN Connection...

  • Page 114

    Section 3 - Configuration Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-505 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) •...

  • Page 115

    6. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router. D-Link DIR-505 User Manual...

  • Page 116

    6. Click Save. Settings at the top of the window to save your settings. If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the access point. D-Link DIR-505 User Manual...

  • Page 117

    This section will allow you to change the local network settings of the access point and to configure the DHCP settings. Device Name: Enter the Device Name of the AP. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. LAN Connection...

  • Page 118: Static Ip

    Device Name: Enter the Device Name of the AP. It recommended to change the Device Name if there is more than one D-Link device within the subnet. You can enter the device name of the AP into your web browser to access the instead of IP address for configuration.

  • Page 119

    Section 3 - Configuration Advanced Advanced Wireless Transmit Power: Sets the transmit power of the antennas. HT 20/40 Check to enable or disable this feature. Coexistance: D-Link DIR-505 User Manual...

  • Page 120: Wi-fi Protected Setup

    Create a random number that is a valid PIN. This becomes PIN: the router’s PIN. You can then copy this PIN to the user interface of the registrar. Add Wireless Press the button to start with the wizard to setup the Station: WPS. D-Link DIR-505 User Manual...

  • Page 121

    Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. Confirm Enter the same password that you entered in the Password: previous textbox in order to confirm its accuracy. Enable Check to enable this feature. Graphical Authentication: D-Link DIR-505 User Manual...

  • Page 122

    If you want to save the current access point configuration settings, use the Save button above. Note: Restoring the factory default settings will not reset the Wi-Fi Protected Status to Not Configured. Reboot the Click to reboot the repeater. Device: D-Link DIR-505 User Manual...

  • Page 123: Language Pack, Firmware

    You can upgrade the firmware of the repeater here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com.

  • Page 124

    To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Save.Settings. You can also click the.Copy. Your.Computer’s.Time.Settings button at the bottom of the screen. D-Link DIR-505 User Manual...

  • Page 125

    Section 3 - Configuration Status Device Info This page displays the current information for the DIR-505. It will display the LAN and wireless LAN information. General: Displays the access point’s time and firmware version. LAN: Displays the MAC address and the private (local) IP settings for the access point.

  • Page 126

    Section 3 - Configuration Logs The DIR-505 keeps a running log of events and activities occurring on the Repeater. If the Repeater is rebooted, the logs are automatically cleared. You can save the log files under Log Setting. Log Options: There are several types of logs that can be viewed: System.

  • Page 127

    Statistics The DIR-505 keeps statistics of the traffic that passes through it. You can view the amount of packets that pass through the LAN and wireless portions of the network. The traffic counter will reset if the access point is rebooted.

  • Page 128: Wi-fi.hot.spot, Quick Setup Wizard

    Pre-Setup Wizard. If you have already completed the Pre-Setup Wizard, please continue to page 106. Enter Admin in the User Name field. Leave the password blank by default. Click Next to continue. Please wait while your device scans for an available Wi-Fi Network. D-Link DIR-505 User Manual...

  • Page 129

    Connect. Enter the Wi-Fi password and click Next to continue. Select Use the same Wi-Fi Network name for the extended Network and click Next. Your setup is now complete. Click Save to finish. D-Link DIR-505 User Manual...

  • Page 130

    Section 3 - Configuration To start the Wizard, click Next to continue. Please wait while your device scans for an available Wi-Fi Network. Select the Network you would like your device to connect to and click Connect. D-Link DIR-505 User Manual...

  • Page 131

    Section 3 - Configuration Enter the Wi-Fi password and click Next to continue. Select Use the same Wi-Fi Network name for the extended Network and click Next. Your setup is now complete. Click Save to finish. D-Link DIR-505 User Manual...

  • Page 132: D-link Dir-505 User Manual Setup, Setup, Wi-fi Hot Spot Setup

    Visibility Status is set to Invisible, see below). This name is also referred to as the SSID. Channel Width: Select the appropriate channel width between 20MHz or Auto.20/40MHz from the drop-down menu. Security Mode: Select WEP or WPA Personal. D-Link DIR-505 User Manual...

  • Page 133

    Section 3 - Configuration Please Select the Wi-Fi Hotspot you would like to connect to with your device. D-Link DIR-505 User Manual...

  • Page 134

    7. Click Save.Settings at the top of the window to save your settings. If you are configuring the access point with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the access point. D-Link DIR-505 User Manual...

  • Page 135: Internet Settings

    MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. Wi-Fi Protected Select to enable this feature. Setup: D-Link DIR-505 User Manual...

  • Page 136: Wireless Lan Setup

    Wireless LAN Setup Use this section to configure the Wireless LAN settings for your D-Link Router. You can create a new Wi-Fi Network Name (SSID) for your local Wi-Fi Network (WLAN) or use the same Wi-Fi Network Names (SSID) as the joined Wi-Fi, HotSpot for your local Wi-Fi Network (WLAN).

  • Page 137: Manual Wireless Settings

    Enter a key (passphrase). The key is entered as a passphrase in ASCII format at both ends of the wireless connection. The pass-phrase must be between 8-63 characters. Wi-Fi Protected Select to Enable this feature. Setup: D-Link DIR-505 User Manual...

  • Page 138

    This section will allow you to change the local network settings of the access point and to configure the DHCP settings. Device Name: Enter the Device Name of the AP. It is recommended to change the Device Name if there is more than one D-Link device within the subnet. LAN Connection...

  • Page 139: D-link Dir-505 User Manual Media Server

    This feature allows you to share music, pictures and videos with any devices connected to your network. Enable Media Check this box to enable the media server feature. Server: Computer Enter the media server’s name. Name: D-Link DIR-505 User Manual...

  • Page 140

    Verify Password: Re-enter the password. Click Add/Edit to create the user. User List: Displays the accounts. The Admin and Guest accounts are built-in to the router. Number of Displays the USB device plugged into the router. Devices: D-Link DIR-505 User Manual...

  • Page 141

    Wireless.Client.List drop-down menu and then click << to populate the MAC Address field. Click Save.Settings to activate and save. Clear: Click to remove the client from the MAC address filter rule. D-Link DIR-505 User Manual...

  • Page 142

    Sets the transmit power of the antennas. HT 20/40 You may choose to Enable or Disable this feature. Enabling Coexistance: this feature allows two “channels” or paths on which data can travel to be combined to increase performance in some environments. D-Link DIR-505 User Manual...

  • Page 143

    Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. Enter the same password that you entered in the Confirm previous textbox in order to confirm its accuracy. Password: Enable Check to enable this feature. Graphical Authentication: D-Link DIR-505 User Manual...

  • Page 144

    If you want to save the current access point configuration settings, use the Save button above. Note: Restoring the factory default settings will not reset the Wi-Fi Protected Status to Not Configured. Reboot the Click to reboot the access point. Device: D-Link DIR-505 User Manual...

  • Page 145

    You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com.

  • Page 146

    To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Save.Settings. You can also click the.Copy. Your.Computer’s.Time.Settings button at the bottom of the screen. D-Link DIR-505 User Manual...

  • Page 147

    Device Info This page displays the current information for the DIR-505. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.

  • Page 148

    Section 3 - Configuration Logs The DIR-505 keeps a running log of events and activities occurring on the AP. If the AP is rebooted, the logs are automatically cleared. You can save the log files under Log Setting. Log Type: Use the radio buttons to select the types of messages that you want to display from the log.

  • Page 149

    Section 3 - Configuration Statistics The DAP-505 keeps statistics of the traffic that passes through it. You can view the amount of packets that pass through the LAN and wireless portions of the network. D-Link DIR-505 User Manual...

  • Page 150

    Section 3 - Configuration Help Click the desired hyperlink to get more information about how to use the Router. D-Link DIR-505 User Manual...

  • Page 151: Connect.a.wireless.client.to.your.router, Wps Button

    Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-505 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS.

  • Page 152: Wpa/wpa2

    If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area. D-Link DIR-505 User Manual...

  • Page 153

    If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-505 User Manual...

  • Page 154

    It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-505 User Manual...

  • Page 155

    Section 4 - Security The WPS feature of the DIR-505 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu.

  • Page 156

    Section 4 - Security 3. Double-click the DIR-505. 4. Input the WPS PIN number (displayed in the WPS window on the Router’s LCD screen or in the Setup.> Wireless.Setup menu in the Router’s Web UI) and click Next. D-Link DIR-505 User Manual...

  • Page 157

    Section 4 - Security 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-505 User Manual...

  • Page 158

    Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-505 User Manual...

  • Page 159

    (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking.Basics section in this manual for more information. D-Link DIR-505 User Manual...

  • Page 160

    1.. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect.to.a.network. 2.. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-505 User Manual...

  • Page 161

    It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DIR-505 User Manual...

  • Page 162

    Current PIN that is displayed on the Advanced > Wi-Fi.Protected.Setup section or choose to click the Generate.New.PIN button or Reset.PIN.to.Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DIR-505 User Manual...

  • Page 163

    (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/ IP settings for your wireless adapter. Refer to the Networking.Basics section in this manual for more information. D-Link DIR-505 User Manual...

  • Page 164

    1. Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View.Available.Wireless.Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-505 User Manual...

  • Page 165

    It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-505 User Manual...

  • Page 166: Troubleshooting

    1..Why.can’t.I.access.the.web-based.configuration.utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.

  • Page 167

    • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.

  • Page 168

    • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter.(or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: . ping.[url].[-f].[-l].[MTU.value] Example: ping.yahoo.com.-f.-l.1472 D-Link DIR-505 User Manual...

  • Page 169

    • To change the MTU enter the number in the MTU field and click Save.Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-505 User Manual...

  • Page 170: Wireless.basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.

  • Page 171: What Is Wireless

    Why.D-Link.Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How.does.wireless.work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B.

  • Page 172

    Who.uses.wireless?. Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access •...

  • Page 173: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.

  • Page 174: Networking.basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 175: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step.5 Click OK twice to save your settings. D-Link DIR-505 User Manual...

  • Page 176: Technical.specifications

    1 Maximum wireless signal rate derived from IEEE Standard 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on country’s regulation D-Link DIR-505 User Manual...

  • Page 177: Contacting.technical.support

    • Hardware Revision (located on the label on the bottom of the router (e.g. rev A1)) • Serial Number (s/n number located on the label on the bottom of the router). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.

  • Page 178: Gpl.code.statement

    WRITTEN OFFER FOR GPL AND LGPL SOURCE CODE Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL.

  • Page 179

    Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. D-Link DIR-505 User Manual...

  • Page 180

    (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion. D-Link DIR-505 User Manual...

  • Page 181

    The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source. The Corresponding Source for a work in source code form is that same work. D-Link DIR-505 User Manual...

  • Page 182

    License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work’s users, your or third parties’ legal rights to forbid circumvention of technological measures. D-Link DIR-505 User Manual...

  • Page 183

    “aggregate” if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation’s users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. D-Link DIR-505 User Manual...

  • Page 184

    Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. D-Link DIR-505 User Manual...

  • Page 185

    Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying. D-Link DIR-505 User Manual...

  • Page 186

    ) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors. D-Link DIR-505 User Manual...

  • Page 187

    30 days after your receipt of the notice. Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights D-Link DIR-505 User Manual...

  • Page 188

    License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it. D-Link DIR-505 User Manual...

  • Page 189

    D-Link DIR-505 User Manual...

  • Page 190

    The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. D-Link DIR-505 User Manual...

  • Page 191

    USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. D-Link DIR-505 User Manual...

  • Page 192

    Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. D-Link DIR-505 User Manual...

  • Page 193: Warranty

    Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.

  • Page 194

    Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software.

  • Page 195

    • The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.

  • Page 196

    Purolator Canada or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in Canada, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer.

  • Page 197

    FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.

  • Page 198

    The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DIR-505 User Manual...

  • Page 199

    Les conditions de fonctionnement sont sujettes à deux conditions: (1) Ce périphérique ne doit pas causer d’interférence et. (2) Ce périphérique doit accepter toute interférence, y compris les interférences pouvant perturber le bon fonctionnement de ce périphérique. D-Link DIR-505 User Manual...

  • Page 200: Registration

    Appendix G - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 March 29, 2012 D-Link DIR-505 User Manual...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: