Maintenance; Admin - D-Link DIR-505 User Manual

All-in-one mobile companion
Hide thumbs Also See for DIR-505:
Table of Contents

Advertisement

Section 3 - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are
two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin
has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the
admin account has the ability to change both admin and user account passwords.

Admin

Enter a new password for the Administrator Login Name. The
Password:
administrator can make changes to the settings.
User Password:
Enter the new password for the User login. If you login as the User,
you cannot change the settings (you can only view them).
Enable Graphical
Enables a challenge-response test to require users to type letters
Authentication:
or numbers from a distorted image displayed on the screen to
prevent online hackers and unauthorized users from gaining
access to your router's network settings.
Check to enable HTTPS to connect to the router securely. This
Enable HTTPS
means to connect to the router, you must enter https://192.168.0.1
Server:
(for example) instead of http://192.168.0.1.
Enable Remote
Remote management allows the DIR-505 to be configured from the Internet by a web browser. A username/password is still required to
Management:
access the Web Management interface.
Remote Admin
The port number used to access the DIR-505 is used in the URL. Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of
Port:
the DIR-505 and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS.Server, you must enter https:// as part of the URL to access the router remotely.
D-Link DIR-505 User Manual

Maintenance

Admin
68

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents