Guest Zone - D-Link DIR-505 User Manual

Section 3 - Router Mode
The Guest Zone feature will allow you to create a separate wireless network that can be used by guests to access the Internet.
These zones will be separate from your main wireless network, allowing you to share Internet access without allowing them
to connect to your own devices. After making your changes, click the Save.Settings button.
Enable Guest
Tick this checkbox to enable the Guest Zone feature.
Zone:
Add New Select when the Guest Zone will be active. The schedule may
Schedule: be set to Always, which will allow the Guest Zone to be on at
all times. You can select a schedule you created, or you can
click the Add.New.Schedule button to create a schedule.
Wireless
Enter a wireless network name (SSID) for your guest zone.
Network It should be different than the network name of your main
Name:
wireless network.
Enable
Check to allow network connectivity between the Guest
Routing Zone and your main network.
Between
Zones:
Here, you can select between None, WEP, WPA-Personal,
Security
Mode: and WPA-Enterprise. Refer to "Wireless Settings" on page
38 for information on how to configure the different security
modes.
D-Link DIR-505 User Manual

Guest Zone

59