D-Link DIR-505 User Manual page 22

Section 2 - Installation
3. Open a web browser. First time users will automatically be directed
to the appropriate Setup Wizard for the selected operation mode.
For more details about this wizard, refer to "Initial Setup Wizard
(Router/AP Mode)" on page 18.
If the Setup Wizard does not appear, type http://dlinkrouter in
the address bar.
If you have set up the DIR-505 before, you will see a login screen.
Select Admin as your user name, and enter the password for the
DIR-505. By default, the password is blank. The configuration
interface will open, and you can configure the different
settings of the DIR-505.
For detailed information on configuring your device, refer to the
following sections of the manual:
• "Router Mode" on page 24
• "Access Point Mode" on page 74
• "Repeater Mode" on page 96
• "Wi-Fi Hot Spot Mode" on page 115
D-Link DIR-505 User Manual 17