Wireless Setup - D-Link DIR-505 User Manual

Section 4 - Access Point Mode
Here, you can configure the wireless network settings of the DIR-505. After making your changes, click the Save.Settings button.
Wireless
When you are browsing for available wireless networks, this
Network is the name that will appear in the list (unless Visibility Status
Name:
is set to Invisible, see below). This name is also referred to as
the SSID. For security purposes, it is highly recommended
to change from the default network name.
Wireless
Select one of the following based on your needs:
Mode:
•.802.11b.Only: Select this if you are only using 802.11b
wireless clients.
•.802.11g.Only: Select this if you are only using 802.11g
wireless clients.
•.802.11n.Only: Select this if you are only using 802.11n
wireless clients.
•.Mixed.802.11g.and.802.11b: Select this if you are using
a mix of 802.11g and 11b wireless clients.
•.Mixed.802.11n.and.802.11g: Select this if you are using
a mix of 802.11n and 11g wireless clients.
•.Mixed.802.11n,.802.11g.and.802.11b: Select this if you
are using a mix of 802.11n, 11g, and 11b wireless clients.
Enable Auto The Auto.Channel.Scan setting can be selected to allow
Channel Scan:
the DIR-505 to choose the channel with the least amount
of interference.
Wireless
Indicates the channel setting for the DIR-505. The Channel
Channel: can be changed to fit the channel setting for an existing
wireless network or to customize the wireless network. If you
enable Auto Channel Scan, this option will be grayed out.
Channel Select whether to use Auto 20/40 MHz or 20 MHz for the
D-Link DIR-505 User Manual

Wireless Setup

76