Wireless Setup - D-Link DIR-505 User Manual

Section 5 - Repeater Mode
Use this section to manually configure the settings for your DIR-505's wireless connection to your router, or the wireless net-
work you want to extend. After making your changes, click the Save.Settings button.
This will state Repeater.Mode when in Repeater Mode. You
Wireless
Mode: can click the Site.Survey button to look for available wireless
networks to extend. Selecting a wireless network from the
list that appears will automatically fill in the settings below.
Wireless When you are browsing for available wireless networks, this
Network is the name that will appear in the list (unless Visibility Status
Name: is set to Invisible, see below). This name is also referred to as
the SSID. For security purposes, it is highly recommended
to change from the default network name.
Channel Select the appropriate channel width between 20MHz or
Auto.20/40MHz from the drop-down menu.
Width:
Select None, WEP, or WPA-Personal. For security purposes,
Security
Mode: it is highly recommended that you set this to WPA-Personal.
Wi-Fi Wi-Fi Protected Setup, or WCN, allows you to configure the
Protected
basic settings of the DIR-505 through Windows. To enable
Setup: this feature, check the Enable checkbox.
D-Link DIR-505 User Manual

Wireless Setup

100