Setting Up Your Dir-505 Through A Web Browser - D-Link DIR-505 User Manual

Section 2 - Installation

Setting Up Your DIR-505 Through a Web Browser

1. Move the switch on the top of the DIR-505 to the mode you
wish to use, then plug it in. Verify that the power LED has
turned green before continuing.
If.you.are.using.Router/AP.Mode:
Move the switch on the top of the DIR-505 to Router/AP and
plug it into a wall outlet near your cable/DSL modem or router.
Connect one end of the Ethernet cable into the Ethernet port
of your cable/DSL modem or router and then plug the other
end of the cable into the Ethernet port of the DIR-505. Verify
that the power LED has turned green before continuing.
2. From your laptop or mobile device, go to your Wireless Utility
to display the available wireless networks and select the
Wi-Fi name that is printed on the Wi-Fi Configuration Card
included in your package (ex: dlink-a8fa). Then, enter the
Wi-Fi password also printed on the Wi-Fi Configuration Card
(akbdj1936).
D-Link DIR-505 User Manual
Outlet Ethernet
16