AT&T 6300 Service Manual page 91

INSTALLATIONS
9. Align the RAM chip pins (A) with a socket (B) as in
Figure 3-5. Make sure that the notch in the chip (C) is
facing the same direction as the other chips on the board. To
insert, push the chip down firmly.
c
A
Figure 3-5. Inserting RAM Chip into the Socket
10. Repeat Step 8 for the remaining 17 sockets in Bank 1 of the
Motherboard memory.
11. Remove the wrist strap (if a wrist strap was used).
3-15