AT&T 6300 Service Manual page 246

DIAGNOSTICS
MENUE
The purpose of MENU E, Error Logging Utilities, is to provide you
with a means of recording diagnostic errors. MENU E appears
when the 2 key is pressed followed by the ENTER key at the end
of MENU A. MENU E looks like this:
ERROR LOGGING UTILITIES
o -
INITIALIZE ERROR LOG
1 - DISPLAY ERROR LOG
2 - STOP ERROR LOG
3 - SET TIME TO 00:00:00
4 - DISPLAY TIME
5 - EXIT [TO TEST OPTIONS MENU]
ENTER DESIRED ACTION ­
If you press the 0 key, followed by the ENTER key, an error log
is initialized that records the failures detected by diagnostic tests.
You must choose which device will be used in recording errors
from the following menu:
CURRENT LOGGING DEVICE
=
nul:
CHOOSE ERROR OUTPUT DEVICE:
o -
DISK
1 - PARALLEL PRINTER (PRN:)
2 - SERIAL PORT (AUX:)
3 - NO CHANGE
ENTER DESIRED ACTION ­
4-54