AT&T 6300 Service Manual page 243

DIAGNOSTICS
MENUC
The purpose of MENU C is to provide Service Personnel with the
ability to add hardware to the list shown in MENU B. MENU C
looks like this:
HARDWARE OPTIONS THAT CAN BE ADDED TO LIST:
9 - 10 MB HDU DRIVE AND CONTROLLER
10 - PARALLEL PRINTER (LPT1:)
18 - 8087 MATH COPROCESSOR
21 - 1 SERIAL PORT (USING 8530)
23 - VIDEO OPTION BOARD
24 - XX HARD DISK AND CONTROLLER
To add all of the listed hardware, press the ENTER
key only.
To add individual hardware function(s), enter the desired
number(s), with spaces between the numbers, and then press
the ENTER key.
You can, thus, add items from the Hardware Options List. After
having done this, MENU B (plus added hardware) is again
displayed, and you are asked if the list of hardware is correct.
4-51