Sample Protocol.ini File - 3Com ETHERLINK III LAN PC CARD User Manual

B-6 A
PPENDIX
; address to map card's CIS memory during driver
; initialization. Window is released
; after driver finishes initializing card or
; fails to find card.
;
;
; NOTE: frame ethernet_802.3
; This is a version 4.X DOS ODI driver.
; default frame type is 802.2, but you may be
; using 802.3 if your server is version 3.11 or
; earlier.
; NODE ADDRESS 0020AFXXXXXX

Sample PROTOCOL.INI File

This sample PROTOCOL.INI file is similar to the PROTOCOL.INI
file on your computer.
;3C589C 3Com EtherLink III LAN PC Card
PROTOCOL.INI File
;
DRIVERNAME = ELPC3$
;MEMORY = 0xEF00
; adapter memory window (optional)
; If parameter not present in PROTOCOL.INI, driver auto
; selects a free 4K memory window. Released after
; initialization of card.
; use this address to map card's CIS memory during
; driver initialization. Window is released after
; driver finishes initializing card or fails to find card.
; Use 0xC000 - 0xEF00 in steps of 0x100
;IOADDRESS = 0x300
; adapter base address (optional)
; If parameter not present in PROTOCOL.INI, driver uses
; the value saved from running configuration program.
; This parameter is only used to specify a single adapter
; in a multi-adapter configuration. Must match value set
; by Diagnostic/Config.
; Use 0x200 - 0x3E0 in steps of 0x10
;SLOT = 2
; PC Card slot number (optional)
; If parameter not present in PROTOCOL.INI, driver
; searches all slots looking for for an Etherlink III
; LANPC Card Adapter.
; This parameter is only used to specify a single adapter
; in a multi-adapter configuration.
; Use 0 - 8
B: PC C S
ARD PECIFICATIONS AND
Use 0xC000 - 0xEF00 in steps of 0x100
If specified, forces driver to
S F
AMPLE ILES
The